You are here: Home > WELDING CABLE > 3/0
Sort By:
Page of 1
3/0 CCI ROYAL EXCELENE WELDING CABLE BLACK 3/0 CCI ROYAL EXCELENE WELDING CABLE RED 3/0 WELDING & BATTERY CABLE SAE J1127 BLACK
3/0 CCI ROYAL EXCELENE WELDING CABLE BLACK MADE IN USA
Usually Ships in 24 Hours
Our Price: $5.50
In Stock
3/0 CCI ROYAL EXCELENE WELDING CABLE RED MADE IN USA
Usually Ships in 24 Hours
Our Price: $5.50
In Stock
3/0 WELDING & BATTERY CABLE SAE J1127 BLACK MADE IN USA EPDM JACKET
Usually Ships in 24 Hours
Our Price: $5.50
In Stock
3/0 EXCELENE WELDING CABLE WITH A HIGH FLEXABILITY AND IS RATED FOR 600V,CAN BE USED AS LEADS FOR A WELDER OR BATTERY CABLES FOR MACHINERY. (ROHS COMPLIANCE) MADE IN USA. 3/0 EXCELENE WELDING CABLE WITH A HIGH FLEXABILITY AND IS RATED FOR 600V,CAN BE USED AS LEADS FOR A WELDER OR BATTERY CABLES FOR MACHINERY. (ROHS COMPLIANCE) MADE IN USA.
Highly flexible annealed 30 gauge bare copper conductor, insulated with an EPDM jacket and paper separator. Operating temperatures range from -50°C to +105°C (-58°F to +221°F). Rated to 600 volts

• Resists Abrasion, Cut, Tear, Flame, Grease, Oil and Water
• RoHS Compliant.
Rugged jacket and highly flexible.
• Made in the USA.
Applications: Welding - Car Audio - Battery Installs - Solar - Battery Banks - Power Cable
SAE J1127 Standard
• Requires a minimum amount of copper.
• Higher tensile strength.
• Passes the SAE flame test.
• Passes exposure to oils and fluids including: Gasoline, Oil, Engine Coolant, Acid, Power Steering Fluid, Diesel, Transmission Fluid, and Ethanol.
3/0 WELDING & BATTERY CABLE SAE J1127 RED
3/0 WELDING & BATTERY CABLE SAE J1127 RED MADE IN USA EPDM JACKET
Usually Ships in 24 Hours
Our Price: $5.50
In Stock
Highly flexible annealed 30 gauge bare copper conductor, insulated with an EPDM jacket and paper separator. Operating temperatures range from -50°C to +105°C (-58°F to +221°F). Rated to 600 volts

• Resists Abrasion, Cut, Tear, Flame, Grease, Oil and Water
• RoHS Compliant.
Rugged jacket and highly flexible.
• Made in the USA.
Applications: Welding - Car Audio - Battery Installs - Solar - Battery Banks - Power Cable
SAE J1127 Standard
• Requires a minimum amount of copper.
• Higher tensile strength.
• Passes the SAE flame test.
• Passes exposure to oils and fluids including: Gasoline, Oil, Engine Coolant, Acid, Power Steering Fluid, Diesel, Transmission Fluid, and Ethanol.